Analysis Of The Bearing Capacity Of The Boredpile Foundation In The Advanced Construction Project Of Class Iia Prison Pematang Siantar Using Analytical Method And Finite Element Method With Plaxis 2D
DOI:
https://doi.org/10.30743/7f75y632Keywords:
Foundation; Bored Pile; Plaxis 2DAbstract
Foundations are used in civil engineering to define a building construction that functions as a building support and transmits the load of the building above it to a layer of soil that has sufficient bearing capacity. Meanwhile, the foundation itself consists of two types, namely shallow foundation and deep foundation. Boredpile foundation is an example of a deep foundation. Bored pile foundation is a type of tube-shaped deep foundation (deep well), which functions to forward the load of the building structure above it from the ground surface to the hard soil layer below. The purpose of writing this thesis is to determine the settlement value and bearing capacity of bored pile foundation with the comparison of analytical methods (Meyerhoff and Schmertmann & Nottingham) and finite element method with the help of Plaxis 2D Software and PDA. The results and discussion of the calculation analysis obtained the conclusion that the comparison of the bearing capacity of the foundation using the analytical method and the finite element method with Plaxis 2D obtained comparison results with the Mayerhoff method of 33.37%, Schermetmann & Nottingham produced 44.44%, and Plaxis 2D of 38.64%. While in the comparison of foundation settlement results obtained with mayerhoff results of 6.22%, Schermetmann & Nottingham produces 4.56%.
References
. Darwis, H. (2018). Dasar-dasar mekanika tanah. Edisi Pertama. Yogyakarta.
. Hemeda, S. (2024). PLAXIS 3D numerical analysis of complex geotechnical problems of colossal built heritage.
. Hendrawan, A. (2022). Analisis daya dukung pondasi bored pile menggunakan metode elemen hingga. Jurnal Teknik Sipil, 15(2), 123–135.
. Hotasi, C. S., Yassin, H., & Kawanda, A. (2019). Analisis stabilitas dinding penahan tanah dengan Plaxis 2D. Prosiding Seminar Intelektual Muda.
. Kementerian Hukum dan HAM. (2022). Laporan tahunan Kementerian Hukum dan HAM 2022. Diakses dari https://www.kemenkumham.go.id
. Mahmudi, A., Putri, M. T. H., & Warodyo, T. (2023). Analisa perbandingan daya dukung pondasi bored pile berdasarkan data sondir dan pile driving analyzer test pada proyek pengembangan gedung J Universitas Kristen Petra Surabaya.
. Malik, A. (2023). Plaxis 2D pada permasalahan geoteknik. Edisi Pertama. Yogyakarta: Universitas Negeri Yogyakarta.
. Mutiara, I. (2021). Analysis of bored pile foundation bearing capacity based on cone penetration test data (Case study: Cilellang Weir location).
. Napitipulu, K., & Sari, K. I. (2023). Analisis daya dukung dan penurunan pondasi bored pile berdasarkan data pengujian CPT dengan software Plaxis pada pembangunan pasar baru Panyabungan Kabupaten Mandailing Natal.
. Prasetyo, B. (2023). Evaluasi kinerja pondasi bored pile pada proyek konstruksi di daerah berisiko tinggi. Jurnal Geoteknik Indonesia, 10(1), 45–58.
. PUSTEK E&T. (2021). Finite element analysis. Diakses dari https://pustek.com/pustekservice/finite-element-analysis/ (diakses Juni 09, 2025).
. Sundari, R. F., Roesyanto, R., Hasibuan, G. C. R., & Surbakti, R. (2024). Analisis daya dukung aksial bored pile Ø 80 cm dengan menggunakan uji beban statik dan menggunakan metode elemen hingga pada proyek menara BRI – Medan.
. Teguh, R., Rusbandi, S., Sudiadi, D., Novita, D., & Mardiani, M. (2022). Penerapan aplikasi Plaxis pada Prodi Teknik Sipil Fakultas Teknik Universitas Tridinanti Palembang.
. Triastuti, N. S. (2022). Berbagai macam pondasi. Edisi Pertama. Makassar
Downloads
Published
Issue
Section
License
Copyright (c) 2025 M.Husni Malik Hasibuan, Jupriah Sarifah, Nazla Elyza
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
