Calculation of Centrifugal Pump Effectiveness Using The Overall Equipment Effectiveness (OEE) Method at PT. Permata Hijau Group

Authors

  • Wirda Novarika AK Universitas Islam Sumatera Utara Author
  • Wery Prahendi Gultom Universitas Islam Sumatera Utara Author
  • Suliawati Suliawati Universitas Islam Sumatera Utara Author

DOI:

https://doi.org/10.30743/ssyg7m34

Keywords:

Overall Equipment Effectiveness (OEE); Centrifugal Pump; Six Big Losses; reduced speed; efficiency

Abstract

Centrifugal pumps often experience downtime due to damage, which disrupts the production process. By applying the Overall Equipment Effectiveness (OEE) method, it is expected that the factors causing decreased pump efficiency can be identified, and strategies and corrective actions can be formulated to improve the operational efficiency of centrifugal pumps at PT. Permata Hijau Group from May 2024 to April 2025. The research results showed that the OEE values each month were above the JIPM standard of 85%, with the highest value in February 2025 at 88.15% and the lowest in July 2024, September 2024, January 2025, and March 2025 at 85.34%. The biggest losses came from reduced speed losses at 8.32% and idling and minor stoppages losses at 6.96%. Based on a fishbone analysis, the main cause of high breakdown time in the Hydrogenation division of PT. Permata Hijau Group is the lack of scheduled preventive maintenance, indicating a need for the company to reorganize its maintenance schedule.

References

. Abbas, M., & Shafiee, M. (2020). An overview of maintenance management strategies for corroded steel structures in extreme marine environments. Marine Structures, 71(January), 102718. https://doi.org/10.1016/j.marstruc.2020.102718

. Akbar Waluyo, A., & Widyaningrum, D. (2023). Perbaikan Sistem Perawatan Mesin Forming dengan Metode FMECA dan RCM Berdasarkan Analisis OEE Pada PT XYZ. Jurnal Serambi Engineering, 8(4), 7281–7290. https://doi.org/10.32672/jse.v8i4.6862

. Amalia, C., Marsudi, M., & Trianiza, I. (2021). Analisis Efektivitas Pompa Distribusi Pdam Ipa Ii Bandarmasih Dengan Menggunakan Metode Overall Equipment Effectiveness. Journal of Industrial Engineering and Operation Management, 4(2), 35–45. https://doi.org/10.31602/jieom.v4i2.5833

. Amoi Simo;on, B. C. M. (2022). Perencanaan Mesin Fluida (Pompa Centrifugal) untuk Mengalirkan Minyak Sawit dari Tangki Harian ke Storage Tank dengan Kapasitas 5.28 Ton/ Jam.

. Eka, P. W., & Nugroho, S. (2017). Analisa Perhitungan Nilai Overall Equipment Effectiveness (OEE) Pada Tiga Proses Pengolahan CPO dan Analisis Six Big Losses di Pabrik Kelapa Sawit PT. (Bukit Barisan Indah Prima) BBIP PALM GROUP. Jurnal Teknik Industri Universitas Diponegoro, 1(1), 1–9.

. Hadi Ariyah. (2022). Penerapan Metode Overall Equipment Effectiveness (OEE) Dalam Peningkatan Efisiensi Mesin Batching Plant (Studi Kasus : PT. Lutvindo Wijaya Perkasa). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(2), 70–77. https://doi.org/10.55826/tmit.v1iii.10

. Ismuaji, M. D., Hasibuan, A., & Suliawati, S. (2022). Analisis Efektivitas Mesin Produksi Filter Press dengan Metode Overall Equipment Effectiveness pada PT Permata Hijau Palm Oleo-Belawan. Factory Jurnal Industri, Manajemen Dan Rekayasa Sistem Industri, 1(1), 16–25. https://doi.org/10.56211/factory.v1i1.109

. Kuncahyo, D. S. (2014). Pendekatan Penerapan Total Productive Maintenance (Tpm) Di Stasiun Press Palm Oil Pada Mesin Digester Dan Mesin Press Pt. Bangkitgiat Usaha Mandiri Dengan Menggunakan Indikator Oee Dan Metode Fmeca (Failure Mode Effect and Critical Analysis). Penelitian Dan Aplikasi Sistem Dan Teknik Industri, 8(3), 436–450.

. Purba, H. R. M., Zurairah, M., & Lubis, M. F. (2023). Potensi Penurunan Downtime Pompa Bran Luebbe Dalam Pengolahan Minyak Kelapa Sawit Dengan Metode Reliability Centered Maintenance di PT X. 12(1), 335–340.

. Ridwansyah, M. ., Nusraningrum, D., & H.Sutawijaya, A. (n.d.). ANALISIS OVERALL EQUIPMENT EFFECTIVENESS UNTUK MENGENDALIKAN SIX BIG LOSSES PADA MESIN PEMBUATAN NUGGET.

. Ridwansyah, M., Nusraningrum, Sutawijaya, D., & H, A. (n.d.). ANALISIS OVERALL EQUIPMENT

EFFECTIVENESS. 38–51.

. Siagian, W., & Mardianti, N. (2024). Peningkatan Kinerja Mesin Manual Melalui Penggunaan Metode Overall Equipment Effectiveness (Oee) Dan Identifikasi Six Big Losses. Industri Inovatif : Jurnal Teknik Industri, 14(1), 72–80. https://doi.org/10.36040/industri.v14i1.7839

. Soni Fajar Mahmud. (2019). Proses Pengolahan CPO (Crude Palm Oil) menjadi RBDPO(Refined Bleached and Deodorized Palm Oil) di PT XYZ Dumai. Jurnal Unitek, 12(1), 55–64. https://doi.org/10.52072/unitek.v12i1.162

. Wardana, A. F. A. (2023). Analisis Pemakaian Jumlah Bleaching Earth Terhadap Kualitas Warna RBDPO (Refined Bleached Deodorized Palm Oil) Pada Proses Refinery di PT. XYZ.

. Yudisha, N., Rida, R., Lumbantoruan, T. T., Lestari, S. A., & Fadhilah, N. (2024). Analisis Tingkat Kebisisngan dan Pengendaliannya di PT. Permata Hijau Palm Oleo KIM II Medan.

Downloads

Published

2025-08-10

Issue

ICST UISU 2025

Section

Articles

License

Copyright (c) 2025 Wirda Novarika AK, Wery Prahendi Gultom, Suliawati

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.